ConnectUPS (Exide) Powerware 1.3.6.1.4.1.534

Denika Performance Trender™ is a 100% web configurable view into the performance of your IT and IS resources. Denika answers: How much of the resource (network bandwidth, CPU, hard drive, etc.) is being consumed? What is the Up-Time of an important application, server and or network device? What is the Response-Time of an important application, server and or network device?

Moderators: scottr, Moderator Team

Locked
LLigetfa
Posts: 19
Joined: Sat Mar 11, 2006 12:25 pm
Location: FortFrances.ON.CA

ConnectUPS (Exide) Powerware 1.3.6.1.4.1.534

Post by LLigetfa » Thu May 11, 2006 2:57 pm

OK, it took me longer than it should have to get around to writing configs but here is my first blush.

One small mention when trying to discover these in Denika is that the OID sysName (1.3.6.1.2.1.1.5) is set generically to be all the same and not exposed in the web interface. You need to poke a unique name into the MIB.

I used a math expression on some of the templates to convert seconds to minutes and tenths of a hertz to hertz. I would have liked to scale the voltage Y axis so that min was 100 and max was 130 and I'm fairly certain that it could be done but am running out of time so I will post what I have so far. Maybe someone could one-up me and post their version.

Code: Select all

xupsBatCapacity (1.3.6.1.4.1.534.1.2.4)
<--- BEGIN COPY AND PASTE --->

Target[$CFGNAME]:1.3.6.1.4.1.534.1.2.4.0&1.3.6.1.4.1.534.1.2.4.0:$COMMUNITY@$IPADDRESS
MaxBytes[$CFGNAME]: 100
Title[$CFGNAME]: $DEVICE
PageTop[$CFGNAME]: <H1>$DEVICE</H1>
Options[$CFGNAME]: gauge, nopercent, absolute, integer, noo
YLegend[$CFGNAME]: Capacity
ShortLegend[$CFGNAME]: Percent
Legend1[$CFGNAME]: Battery Capacity
Legend2[$CFGNAME]: .
Legend3[$CFGNAME]: Max value per interval on graph
Legend4[$CFGNAME]: .
LegendI[$CFGNAME]: Capacity
LegendO[$CFGNAME]: .
Colours[$CFGNAME]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[$CFGNAME]: ymw
Unscaled[$CFGNAME]: ymwd

<--- FINISH COPY AND PASTE --->

xupsBatTimeRemaining (1.3.6.1.4.1.534.1.2.1)
<--- BEGIN COPY AND PASTE --->

Target[$CFGNAME]: 1.3.6.1.4.1.534.1.2.1.0&1.3.6.1.4.1.534.1.2.1.0:$COMMUNITY@$IPADDRESS / 60
MaxBytes[$CFGNAME]: $MAX
Title[$CFGNAME]: $DEVICE
PageTop[$CFGNAME]: <H1>$DEVICE</H1>
Options[$CFGNAME]: gauge, nopercent, absolute, integer, noo
YLegend[$CFGNAME]: Minutes
ShortLegend[$CFGNAME]: Min
Legend1[$CFGNAME]: Minutes Remaining
Legend2[$CFGNAME]: .
Legend3[$CFGNAME]: Max value per interval on graph
Legend4[$CFGNAME]: .
LegendI[$CFGNAME]: Capacity
LegendO[$CFGNAME]: .
Colours[$CFGNAME]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[$CFGNAME]: ymw
kMG[$CFGNAME]: ,,

<--- FINISH COPY AND PASTE --->

xupsEnvironment (1.3.6.1.4.1.534.1.6.1) Ambient Temperature
<--- BEGIN COPY AND PASTE --->

Target[$CFGNAME]: 1.3.6.1.4.1.534.1.6.1.0&1.3.6.1.4.1.534.1.6.1.0:$COMMUNITY@$IPADDRESS
MaxBytes[$CFGNAME]: $MAX
Title[$CFGNAME]: $DEVICE
PageTop[$CFGNAME]: <H1>$DEVICE</H1>
Options[$CFGNAME]: gauge, nopercent, absolute, integer, noo
YLegend[$CFGNAME]: Temp
ShortLegend[$CFGNAME]: &deg;C
Legend1[$CFGNAME]: Temperature
Legend2[$CFGNAME]: .
Legend3[$CFGNAME]: Max value per interval on graph
Legend4[$CFGNAME]: .
LegendI[$CFGNAME]: UPS Battery Temperature
LegendO[$CFGNAME]: .
Colours[$CFGNAME]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[$CFGNAME]: ymw

<--- FINISH COPY AND PASTE --->

xupsInput/OutputFrequency (1.3.6.1.4.1.534.1.3.1)(1.3.6.1.4.1.534.1.4.2)
<--- BEGIN COPY AND PASTE --->

Target[$CFGNAME]: 1.3.6.1.4.1.534.1.3.1.0&1.3.6.1.4.1.534.1.4.2.0:$COMMUNITY@$IPADDRESS / 10
MaxBytes[$CFGNAME]: $MAX
Title[$CFGNAME]: $DEVICE
PageTop[$CFGNAME]: <H1>$DEVICE</H1>
Options[$CFGNAME]: gauge, nopercent, absolute, integer
YLegend[$CFGNAME]: Frequency
ShortLegend[$CFGNAME]: Hertz
Legend1[$CFGNAME]: Input Freq. Hz
Legend2[$CFGNAME]: Output Freq. Hz
Legend3[$CFGNAME]: Max Input Freq. Hz
Legend4[$CFGNAME]: Max Output Freq. Hz
LegendI[$CFGNAME]: In Hz
LegendO[$CFGNAME]: Out Hz
Colours[$CFGNAME]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[$CFGNAME]: ymw

<--- FINISH COPY AND PASTE --->

xupsInputVoltage (1.3.6.1.4.1.534.1.3.4.1.2)
<--- BEGIN COPY AND PASTE --->

Target[$CFGNAME]: 1.3.6.1.4.1.534.1.3.4.1.2.1&1.3.6.1.4.1.534.1.3.4.1.2.2:$COMMUNITY@$IPADDRESS
MaxBytes[$CFGNAME]: $MAX
Title[$CFGNAME]: $DEVICE
PageTop[$CFGNAME]: <H1>$DEVICE</H1>
Options[$CFGNAME]: gauge, nopercent, absolute
YLegend[$CFGNAME]: AC Voltage
ShortLegend[$CFGNAME]: VAC
Legend1[$CFGNAME]: Input Voltage 1 to UPS
Legend2[$CFGNAME]: Input Voltage 2 to UPS
Legend3[$CFGNAME]: Max Input value per interval on graph
Legend4[$CFGNAME]: Max Input value per interval on graph
LegendI[$CFGNAME]: 1 IN AC: 
LegendO[$CFGNAME]: 2 IN AC: 
Colours[$CFGNAME]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[$CFGNAME]: ymw

<--- FINISH COPY AND PASTE --->

xupsOutputCurrent (1.3.6.1.4.1.534.1.4.4.1.3)
<--- BEGIN COPY AND PASTE --->

Target[$CFGNAME]: 1.3.6.1.4.1.534.1.4.4.1.3.1&1.3.6.1.4.1.534.1.4.4.1.3.2:$COMMUNITY@$IPADDRESS
MaxBytes[$CFGNAME]: $MAX
Title[$CFGNAME]: $DEVICE
PageTop[$CFGNAME]: <H1>$DEVICE</H1>
Options[$CFGNAME]: gauge, nopercent, absolute
YLegend[$CFGNAME]: Amps Out
ShortLegend[$CFGNAME]: Amps
Legend1[$CFGNAME]: Output Amps 1
Legend2[$CFGNAME]: Output Amps 2
Legend3[$CFGNAME]: Max value per interval on graph
Legend4[$CFGNAME]: Max value per interval on graph
LegendI[$CFGNAME]: 1 OUT:
LegendO[$CFGNAME]: 2 OUT:
Colours[$CFGNAME]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[$CFGNAME]: ymw

<--- FINISH COPY AND PASTE --->

xupsOutputVoltage (1.3.6.1.4.1.534.1.4.4.1.2)
<--- BEGIN COPY AND PASTE --->

Target[$CFGNAME]: 1.3.6.1.4.1.534.1.4.4.1.2.1&1.3.6.1.4.1.534.1.4.4.1.2.2:$COMMUNITY@$IPADDRESS
MaxBytes[$CFGNAME]: $MAX
Title[$CFGNAME]: $DEVICE
PageTop[$CFGNAME]: <H1>$DEVICE</H1>
Options[$CFGNAME]: gauge, nopercent, absolute
YLegend[$CFGNAME]: AC Voltage
ShortLegend[$CFGNAME]: VAC
Legend1[$CFGNAME]: Output Volts 1 from UPS
Legend2[$CFGNAME]: Output Volts 2 from UPS
Legend3[$CFGNAME]: Max Input value per interval on graph
Legend4[$CFGNAME]: Max Output per interval on graph
LegendI[$CFGNAME]: 1 OUT: 
LegendO[$CFGNAME]: 2 OUT: 
Colours[$CFGNAME]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[$CFGNAME]: ymw

<--- FINISH COPY AND PASTE --->

Locked

Who is online

Users browsing this forum: No registered users and 1 guest